The surface temperature of the product when heated in gas should be 

lower than 500 degrees (as the case may be).

Do not touch the liquid when the product is heated in gas.

Sometimes it is damaged by sharp thermal strain.

When heating the parts, make sure that the products are in close contact 

with the parts. Without adhesion, it may be damaged due to the temperature 

difference caused by uneven heating of the product.

Conductor: φ0.3*20 mm (can be customized according to customer specifications).

Conductor tension: horizontal tension ≥ ≧5 Kgf, vertical tension ≥3 kgf.

Withstand voltage test: 1800V/sec, leakage current ≦0.5mA.

Insulation resistance: more than 100MΩ (at DC500V)