Conductor: φ0.3*20 mm (can be customized according to customer specifications).

Conductor tension: horizontal tension ≥ ≧5 Kgf, vertical tension ≥3 kgf.

Withstand voltage test: 1800V/sec, leakage current ≦0.5mA.

Insulation resistance: more than 100MΩ (at DC500V)

The surface temperature of the product when heated in gas should be lower than 500 degrees (as the case may be).

Do not touch the liquid when the product is heated in gas.

Sometimes it is damaged by sharp thermal strain.

When heating the parts, make sure that the products are in close contact with the parts. Without close contact,

Sometimes it will be damaged by the temperature difference caused by uneven heating of the product.